|
Bur Cam Pumps #300514W 1/3 HP Laundry Tub Pump | 
 enlarge | Brand: BUR CAM PUMPS INC
Category: Kitchen
This item is no longer available
Rating:  4 reviews
Sales Rank: 101064
Media: Misc.
MPN: 300514W
UPC: 772910005146
EAN: 0772910005146
ASIN: B000GA3PFG
| |
| Features:
| • | Bur Cam Pumps #300514W 1/3 HP Laundry Tub Pump | | • | BUR CAM PUMPS INC |
|
| Similar Items:
|
| Editorial Reviews:
Product Description
1/3 HP, Automatic Laundry Tub Pump, Automatic Switch Starts Motor When Water Enters In The Pump Body, Mounts Directly To Tail Piece, Union, Check Valve & Discharge Valve Included, No Trap Or Inlet Piping Required, No Vent Connection Required, Thermal & Overload Protection, Fits Under Wet Bars, Kitchenettes, Vanities & Utility Sinks, Maximum Water Temperature 140°ree. Fahrenheit.
|
| Customer Reviews:
 Super powerful with great mounting hardware. November 17, 2008
D. K. Wetherill
This is one heavy duty pump. I have a pump that is about 15 years old that I thought was a workhorse, but this blows that out of the water. I mounted it in no time (all of the hard work was removing non standard pipe sizes and installing adapters to accommodate the output into the main drain line), and it works like a charm. The pressure switch works well, but I thought my pump was DOA when I first installed it because of the hum that came from the pump when only a little water was in it. Once we started using it with our washing machine, though, it kicked into full gear, and discharges ALL of the water very nicely. It even will cycle 2 more times after the water pressure comes off the switch so you know ALL of the water is pumped out! I couldn't be happier. Best investment I could have made!
 Down the drain September 30, 2008
V. Vincent Velardo (new jersey)
A very good inexpensive alternative to a tank type sump pump for a basement sink below the drain line.
Once you make it through the installation it works. August 22, 2008
Zach
I was really irritated to find that in one part of the directions it said you needed a 1 1/2" fitting, then in another it says the pump outlet is 1", yet it's actually 1 1/4". So it took me twice as many trips to the hardware store as it should have, not to mention the fact that 1 1/4" is an odd size so it's harder to find the fittings to adapt to a standard 1 1/2" drain. Then, the ball valve that it comes with is absolute crap, it cracked while I was threading it on, before it was even snug. I noticed after removing it that the mold was incomplete so the wall was thinner on one side, and those things aren't cheap to go buy a new one. Other than that it works, now that it's in there. Kicks on when there's about 3" of water in the sink, and keeps up with the faucet until the water is turned off then it finishes draining the sink.
Easy to install, works fine so far June 6, 2008
C. Chan (Rochester, NY)
2 out of 2 found this review helpful
I have very little plumbing experience but I found the pump to be relatively easy to install. The pump itself screws directly to the laundry tub using the supplied union coupling. Then all I had to do was connect the supplied check valve and ball valve and run PVC piping to the drain line. Installation took less than an hour. Works as described so far, just make sure your connections are tight to prevent leaks.
|
|
|
Copyright 2008 | |
